Mississippi River Skiff construction

Since the bottom of the Mississippi river skiff is "flat"  (it bends through only one plane,) is was super fast to finish.

Because of this we could use wide planks. The planks are 4.5 inch wide ship lapped cedar planks.
They are 5/8ths thick. We started with the bottom and are working down to the gunnels.

After the new poplar had thoroughly dried we planed the strips down to 3/8ths of an inch thick and started the hull's sides.  Working down on the form is different.  It is the opposite of our past projects but for this boat it is working well.

We are using edge clamps to press the strips together and additional clamps to keep the strips tight to the form.  The size of the boat meant it was going to require a trailer from the start.  This lessened the weight considerations and freed up up our choice of materials and thicknesses.  The transom is an attractive shape and we are going to cut it out of a cherry glue up.  It will be an inch thick.

The first hull we build will be set up as a row boat with two stations per the plans.  But the transom will be engineered to take the stress of an outboard.  This is always wanted around here. 

A sail version could be next.

A plumb bob is used to make sure the bow is not pushed out of alignment as the sides are built.

The bob is about 150 years old, and it still works!

Mississippi River Skiff

We are making great progress on the Mississippi River Skiff stations.  It will be our biggest boat to date at over 18 feet.
After our experience using steel stations for the Niangua canoe, we knew the advantages of the steel forms made it worth all the trouble to fabricate them.
For our next boat we were looking for something native to our waters and fell in love with Howard Chappelle's Mississippi River Skiff.   He took lines off a 1889 working wooden boat.  It is on page 97 of his excellent book  American Small Sailing Craft.
Here are the stations during fabrication:

Paper work: we are converting the offsets to inch measurements.  Also we are using some trigonometry to figure the length of the station from the chine to the shear. Click on the image for a closer look.

Here the stations have their centerline and are ready for a coat of acrylic spay to keep them from rusting.

The cherry chine forms are used to narrow the face of the station to accept the bending wood without deflecting it under clamp pressure.

The next posting will show the shape of the hull as the stations are spaced on the strong back.